Interlocking Kelly Bar Drill Rig, Crawler Type, 15–35 m Depth

Crawler kelly bar drill rig with interlocking kelly bar, Φ1500–2200 mm holes, 15–35 m depth, by Kaiao.

The crawler kelly bar drill rig series covers piles from 15 m to 35 m deep and drills Φ1500–2200 mm holes with 70–170 kN·m of torque. The five models weigh 23–33 t and run Cummins or Weichai engines on a 35 MPa hydraulic system. All five use an interlocking kelly bar.

Technical Specifications

Specification 15 m Model 20 m Model 25 m Model 30–35 m Model 20 m Large-Hole Model
Model WD-150 Interlocking (15 m) WD-180 Interlocking (20 m) WD-200 Interlocking (25 m) WD-220 Interlocking Telescopic (30–35 m) KA-170 Telescopic (20 m)
Chassis Crawler Crawler Crawler Crawler, telescopic Crawler, telescopic
Kelly bar Interlocking Interlocking Interlocking Interlocking Interlocking
Hole diameter Φ1500 mm (59 in) Φ1800 mm (71 in) Φ1800 mm (71 in) Φ1800 mm (71 in) Φ2200 mm (87 in)
Drilling depth (rated) 15 m (49 ft) 20 m (66 ft) 25 m (82 ft) 30–35 m (98–115 ft) 20 m (66 ft)
Torque 70 kN·m 90 kN·m 100 kN·m 120 kN·m 170 kN·m
Engine / rated power Cummins 150 hp / 110 kW Cummins 150 hp / 110 kW Cummins 205 hp / 150 kW Cummins 205 hp / 150 kW Weichai 240 hp / 176 kW
Machine weight 23 t (50,700 lb) 25 t (55,100 lb) 28 t (61,700 lb) 29.5 t (65,000 lb) 33 t (72,800 lb)
Travel speed 2 km/h 3 km/h 3 km/h 3 km/h 3 km/h
Transport dimensions 9800×2400×3300 mm 11000×2600×3500 mm 11000×2800×3500 mm 12000×2800×3500 mm 7500×2960×3500 mm
Gradeability (all models) 35%
Hydraulic system pressure (all models) 35 MPa

Kelly Bar Drill Rig: Which Model for Which Pile

Your deepest pile Model to check What decides it
15 m, Φ1500 mm 15 m model, WD-150 70 kN·m, 23 t, the lightest in the series
20 m, Φ1800 mm 20 m model, WD-180 90 kN·m, 25 t
25 m, Φ1800 mm 25 m model, WD-200 100 kN·m, 28 t
30–35 m, Φ1800 mm 30–35 m model, WD-220 120 kN·m, 29.5 t, 3600 mm telescopic chassis
20 m, Φ2200 mm Large-hole model, KA-170 170 kN·m, 33 t, 4300 mm between tracks
Under 15 m, or a very tight site Outside this series See the smaller machine in section 04

The 15 m, 20 m, 25 m and 30–35 m models step up in depth, torque and weight together, from 15 m, 70 kN·m and 23 t to 30–35 m, 120 kN·m and 29.5 t. The large-hole model trades depth for diameter and torque: Φ2200 mm and 170 kN·m at 20 m. All five use a 35 MPa hydraulic system and climb 35% gradients. To compare other tiers, browse all rotary drilling rigs.

Where This Series Fits, and Where It Does Not

These five models are built for small and medium cast-in-place piles on sites a large rig cannot reach. The limits below decide the tier, and they also decide when a different machine in the range is the cheaper answer.

This series fits

  • Piles from 15 m to 35 m deep at Φ1500–2200 mm, in soil, sand, cobble and weathered rock layers.
  • Sites that can take 23–33 t and a transport length of 9.8 to 12 m.
  • Ground hard enough to need crowd force: all five models use an interlocking kelly bar.

Step to a different machine when

  • The piles are shorter than 15 m and the site is narrow. The 13–18.5 t pile drilling machine gets in where these cannot.
  • The piles run past 35 m. Our 40–50 m foundation drill rig takes the next tier.
  • The hole is wider than Φ2200 mm. Send the diameter and depth and we will say what is possible.
  • The site also needs CFA piles at Φ600–800 mm. The CFA piling rig builds those in one pass and still drills rotary piles to 60 m on the same chassis.

Most of these machines end up on housing, municipal and rural building piles; our guide to concrete piles for houses explains how that kind of foundation is built.

Key Features of the Kelly Bar Drill Rig

Interlocking Bar on All Five

Every model in this series uses an interlocking kelly bar, whose sections lock into each other to pass torque and crowd force to the drilling bucket.

70–120 kN·m by Depth Tier

Rotary head torque is 70 kN·m on the 15 m model, 90 kN·m on the 20 m model, 100 kN·m on the 25 m model and 120 kN·m on the 30–35 m model. Torque turns the bucket through the soil, and each deeper tier adds more of it.

Φ2200 mm on the Large-Hole Model

The 20 m large-hole model drills Φ2200 mm holes with 170 kN·m at 10–50 r/min. A larger hole means a larger bucket to turn, press and lift, and this model brings a 120 kN crowd cylinder and a 130 kN main winch at 33 t.

2 km/h or 3 km/h, 3600 mm Chassis

All models run on crawler tracks and climb 35% gradients. The 15 m model travels at 2 km/h and the others at 3 km/h. The 30–35 m model has a telescopic chassis of 3600 mm, and the large-hole model has 4300 mm between its tracks.

110–176 kW, Cummins and Weichai

Cummins 150 hp (110 kW) powers the 15 m and 20 m models, and Cummins 205 hp (150 kW) powers the 25 m and 30–35 m models. The large-hole model uses a Weichai 240 hp (176 kW) engine. All five share a 35 MPa hydraulic system.

Interlocking Kelly Bar Models: Torque and Engine

The interlocking kelly bar passes torque and crowd force from the rotary head to the drilling bucket, and the main winch lifts the full bucket out of the hole. In general, an interlocking kelly bar passes more crowd force and is common in harder ground, while a friction kelly bar works faster in soft soil.

Cummins 150 hp (110 kW) engines power the 15 m and 20 m models, Cummins 205 hp (150 kW) engines power the 25 m and 30–35 m models, and a Weichai 240 hp (176 kW) engine powers the large-hole model. The bar itself is covered in our guide to the kelly bar.

For background on drilled shaft practice, see ADSC, the International Association of Foundation Drilling. If you are unsure, send us your drawings.

Kelly Bar Drill Rig: Weight and Transport Size

A deeper tier also means a heavier machine, so check site access before you choose. Transport dimensions run 9800–12000 mm long across the four ladder models, and 7500 mm on the large-hole model, which folds shorter. Widths run 2400–2960 mm and heights 3300–3500 mm. Tell us your access road and destination, and we will confirm the model fits the route.

  • The 15 m model is 9800 mm long and 2400 mm wide at 23 t, the easiest of the five to move.
  • The 30–35 m model reaches 12000 mm long and 29.5 t, so it needs a low-bed trailer and a wider gate.
  • The large-hole model is 7500 mm long at 33 t, because the telescopic mast folds for transport.
Kaiao rotary drilling rigs loaded for shipment to customers
Kaiao rotary drilling rig shipments to domestic and overseas customers

Frequently Asked Questions

What is an interlocking kelly bar?

An interlocking kelly bar is a telescopic drill rod whose sections lock into each other to pass torque and crowd force to the drilling tool. All five models on this page use one. Compared with a friction kelly bar, it passes more crowd force and is common in harder ground.

How deep can this kelly bar drill rig drill?

The 15 m model drills to 15 m, the 20 m model to 20 m, the 25 m model to 25 m, and the 30–35 m model to 30–35 m. The 20 m large-hole model also drills to 20 m. Depths are rated values and depend on the ground and the kelly bar configuration.

Which model drills the largest hole?

The 20 m large-hole model drills the largest hole, at Φ2200 mm (87 in) to a depth of 20 m. The 20 m, 25 m and 30–35 m models drill up to Φ1800 mm (71 in), and the 15 m model drills Φ1500 mm (59 in).

Do you have a smaller rig for tight sites?

Kaiao also builds a smaller telescopic crawler rig; the pile drilling machine covers Φ400–1800 mm holes at 20–25 m and weighs 13–18.5 t. Send us your site limits and we will tell you honestly which machine fits.

What rotary head torque do these models deliver?

The 15 m model delivers 70 kN·m, the 20 m model 90 kN·m, the 25 m model 100 kN·m, and the 30–35 m model 120 kN·m. The 20 m large-hole model delivers 170 kN·m at 10–50 r/min. All values are rated rotary head torque.

What are the chassis width and weight of each model?

Transport widths are 2400, 2600, 2800, 2800 and 2960 mm for the 15 m, 20 m, 25 m, 30–35 m and large-hole models. The 30–35 m model has a telescopic chassis of 3600 mm, and the large-hole model has 4300 mm between its tracks. Weights are 23, 25, 28, 29.5 and 33 t.

What warranty covers these rigs?

These rigs carry a one-year warranty or 2,000 operating hours; the exact terms are confirmed in your order. Kaiao supplies spare parts and after-sales service from its own factory.

What overhead clearance do these rigs need?

Transport height is 3300–3500 mm, which is for shipping, not for drilling. If your site has an overhead limit, send it with your quote request and we will confirm the working height of the model you need.

Related Applications

  • Housing project foundations
  • Municipal construction piles
  • Rural building foundations
  • Cast-in-place bored piles

Technical Support

Kaiao helps you pick a model by deepest pile, hole diameter and ground. Spare parts and after-sales service come from our own factory in Tengzhou, and the rigs carry a one-year or 2,000-hour warranty. Learn more about Kaiao.

Overseas customers visiting the Kaiao factory in Tengzhou
Group photos of overseas customers at the Kaiao factory

Factory and Custom Work

Tengzhou Kaiao Construction Machinery Co., Ltd. handles development, production, sales, after-sales service and custom work in its own factory, so your questions stay with one team. The plant covers 30,000 m², employs more than 70 people, and puts every rig through four checks before shipment.

30,000 m² Plant

Our own factory in Tengzhou, Shandong

70+ Employees

Development to after-sales in one team

4 Checks

Before every rig ships

ISO 9001 and CE

Company-level certification, plus several patents

Kaiao factory overview and production workshop in Tengzhou
Welding, machining and assembly at the Kaiao factory
Kaiao ISO 9001 and CE certificates
Kaiao patent certificates

Request a Quote for the Kelly Bar Drilling Rig

Send the deepest pile, the hole diameter, the ground or soil report, the narrowest point on your access road, and your destination port. If you are choosing between the 25 m and the 30–35 m model, say so, and we will compare the two on the ground you actually have.

Contact Kaiao

Email: [email protected]

Tel: +86 186 6320 9687

Factory: Tengfa Science and Technology Industrial Park, Shannan Road, Tengzhou City, Zaozhuang City, Shandong Province, 277500, China




Need a quote? Chat with us