Heavy-Duty Crawler Caisson Drill Rig, 57–105 m Depth

Heavy-duty crawler caisson drill rig series for Φ2000–2700 mm holes to 57–105 m depth, built by Kaiao.

This heavy-duty caisson drill rig series drills Φ2000–2700 mm holes to 57–105 m depth with 220–365 kN·m of torque. The five models weigh 65–110 t, run 194–294 kW Cummins engines and share a 35 MPa hydraulic system. Every model is a crawler caisson rig built for deep foundations.

Technical Specifications

Specification 57 m Model 65 m Model 69 m Model 85 m Model 105 m Model
Model KA-205 (57 m) KA-235 (65 m) KA-265 (69 m) KA-285 (85 m) KA-365
Chassis Crawler Crawler Crawler Crawler Crawler
Hole diameter Φ2000 mm (79 in) Φ2000 mm (79 in) Φ2000 mm (79 in) Φ2200 mm (87 in) Φ2700 mm (106 in)
Drilling depth (rated) 57 m (187 ft) 65 m (213 ft) 69 m (226 ft) 85 m (279 ft) 105 m (344 ft) with friction kelly bar; 68 m (223 ft) with interlocking kelly bar
Torque / rotary speed 220 kN·m / 7–27 r/min 258 kN·m / 7–26 r/min 265 kN·m / 5–26 r/min 295 kN·m / 6–28 r/min 365 kN·m / 5–25 r/min
Main winch line pull (series range) 190–330 kN
Engine / rated power Cummins 260 hp / 194 kW Cummins 325 hp / 242 kW Cummins 360 hp / 265 kW Cummins 400 hp / 294 kW Cummins 400 hp / 294 kW
Machine weight 65 t (143,300 lb) 78 t (172,000 lb) 83 t (183,000 lb) 85 t (187,400 lb) 110 t (242,500 lb)
Travel speed (series range) 1.6–2.2 km/h
Transport dimensions 14300×3200×3700 mm 16000×3200×3700 mm 17200×3400×3700 mm 17200×3500×3800 mm 16000×3500×3700 mm
Gradeability (all models) 35%
Hydraulic system pressure (all models) 35 MPa

Caisson Drill Rig: Which Model for Which Pile

Your pile Model to check What decides it
Φ2000 mm, to 57 m KA-205 220 kN·m, 65 t, the lightest model in the series
Φ2000 mm, to 65 m KA-235 258 kN·m, 78 t
Φ2000 mm, to 69 m KA-265 265 kN·m, 83 t
Φ2200 mm, to 85 m KA-285 295 kN·m, 85 t
Φ2700 mm, to 105 m KA-365 365 kN·m, 110 t, friction kelly bar for the full 105 m
Deeper than 105 m or wider than Φ2700 mm Outside this series Send the details and we will say what is possible

Moving up the series raises depth, torque and weight together: from 57 m, 220 kN·m and 65 t to 105 m, 365 kN·m and 110 t. Hole diameter steps from Φ2000 mm to Φ2200 mm and Φ2700 mm, and engine power rises from 194 kW to 294 kW. All five models use a 35 MPa hydraulic system and climb 35% gradients. Pick by pile diameter and depth first, then check torque against your geological report. To compare other tiers, browse all rotary drilling rigs.

Where This Series Fits, and Where It Does Not

The five models are built for deep, large-diameter bored piles. The limits below are real, and stepping down a tier is often cheaper than moving a 110 t machine onto a site that cannot take it.

This series fits

  • Bored piles at Φ2000–2700 mm, between 57 m and 105 m deep.
  • Sites with a heavy-haul route: the models ship 14.3 to 17.2 m long at 65–110 t.
  • Ground that needs an interlocking kelly bar: the 105 m model still reaches 68 m on that bar.

Step down a tier when

Bored piles are one of several pile types used on deep foundation work; our guide to types of piling covers how they differ from driven and screw piles.

Key Features of the Caisson Drill Rig

220–365 kN·m Across Five Tiers

The rotary head delivers 220 kN·m on the 57 m model, rising through 258, 265 and 295 kN·m to 365 kN·m on the 105 m model. That torque turns the drilling bucket through the soil, and each step up the series pairs more torque with a deeper or wider hole.

Φ2000–2700 mm, 57–105 m

The 57 m, 65 m and 69 m models drill Φ2000 mm holes. The 85 m model drills Φ2200 mm and the 105 m model drills Φ2700 mm. All depths are rated values, and the reachable depth on site depends on the kelly bar configuration and the ground.

105 m on Friction, 68 m Interlocking

The 105 m model reaches 105 m with a friction kelly bar and 68 m with an interlocking kelly bar. In general, a friction kelly bar works faster in soft soil, while an interlocking kelly bar passes more crowd force and is common in harder ground.

65–110 t, 1.6–2.2 km/h

All five models run on crawler tracks at 1.6–2.2 km/h across the series and climb 35% gradients. Machine weight rises from 65 t on the 57 m model to 110 t on the 105 m model, so heavier tiers need more transport planning.

194–294 kW Cummins, 35 MPa

Cummins engines step up with the models: 260 hp (194 kW) on the 57 m model, 325 hp (242 kW) on the 65 m model, 360 hp (265 kW) on the 69 m model, and 400 hp (294 kW) on the 85 m and 105 m models. All five share a 35 MPa hydraulic system.

Caisson Drilling Equipment: Depth and Torque by Model

The rotary head turns the drilling bucket on the kelly bar while the cylinder crowd system presses it into the soil. The main winch, rated 190–330 kN across the series, lifts the full bucket out of the hole, and the bucket swings over to unload.

Start with the pile diameter and depth, then check torque against your geological report. The pour that follows the hole has its own rules, covered in our guide to the tremie pipe. For background on drilled shaft practice, see ADSC, the International Association of Foundation Drilling. If you are unsure, send us your drawings.

Caisson Rig Weight and Transport Size

Plan transport before you commit, because machines in this class ship long, wide and heavy. Transport dimensions run from 14300×3200×3700 mm on the 57 m model to 17200×3500×3800 mm on the 85 m model, and the 105 m model ships at 16000×3500×3700 mm and 110 t. The table above lists every size. Send your pile diameter, depth, geological report and destination, and we will tell you honestly which model fits.

Kaiao rotary drilling rigs loaded for shipment to customers
Kaiao rotary drilling rig shipments to domestic and overseas customers

Frequently Asked Questions

What is the deepest model in this caisson drill rig series?

The 105 m model is the deepest in the series. It drills to 105 m (344 ft) with a friction kelly bar and to 68 m (223 ft) with an interlocking kelly bar, and it has the largest hole diameter at Φ2700 mm (106 in).

How much do these machines weigh?

The 57 m model weighs 65 t (143,300 lb) and the 105 m model weighs 110 t (242,500 lb). The 65 m, 69 m and 85 m models weigh 78 t, 83 t and 85 t. Heavier models need more transport planning, so send us your route and destination.

What is the difference between this series and the smaller foundation drill rig?

The smaller foundation drill rig drills Φ1800 mm holes to 40–50 m and weighs 42–50 t. This series drills Φ2000–2700 mm holes to 57–105 m and weighs 65–110 t. Choose by pile diameter and depth first, and send us your project details if you sit between the two.

How do I choose a model?

Start with the pile diameter and depth, then check torque, crowd force and winch pull against your geological report. Send Kaiao your pile diameter, depth, geological report and destination through the contact form or on WhatsApp, and we will recommend a model. We reply within 24 hours.

How are these machines transported between job sites?

Transport dimensions are 14300×3200×3700 mm for the 57 m model, 16000×3200×3700 mm for the 65 m model, 17200×3400×3700 mm for the 69 m model, 17200×3500×3800 mm for the 85 m model and 16000×3500×3700 mm for the 105 m model. Tell Kaiao your destination and we will confirm the route fits.

What engine and hydraulic system do these models use?

All five models use Cummins engines: 260 hp (194 kW) on the 57 m model, 325 hp (242 kW) on the 65 m model, 360 hp (265 kW) on the 69 m model, and 400 hp (294 kW) on the 85 m and 105 m models. The hydraulic system runs at 35 MPa.

What warranty covers these machines?

These machines carry a one-year warranty or 2,000 operating hours; the exact terms are confirmed in your order. Kaiao also supplies spare parts and after-sales service from its own factory.

Related Applications

  • Deep large-diameter bored piles
  • Bridge pier foundations
  • Heavy industrial structure foundations
  • Tall building foundations

Technical Support

Kaiao helps you pick a model by pile diameter, depth and geological report. Spare parts and after-sales service come from our own factory in Tengzhou, and the machines carry a one-year or 2,000-hour warranty. Learn more about Kaiao.

Overseas customers visiting the Kaiao factory in Tengzhou
Group photos of overseas customers at the Kaiao factory

Factory and Custom Work

Tengzhou Kaiao Construction Machinery Co., Ltd. handles development, production, sales, after-sales service and custom work in its own factory, so your questions stay with one team. The plant covers 30,000 m², employs more than 70 people, and puts every rig through four checks before shipment.

30,000 m² Plant

Our own factory in Tengzhou, Shandong

70+ Employees

Development to after-sales in one team

4 Checks

Before every rig ships

ISO 9001 and CE

Company-level certification, plus several patents

Kaiao factory overview and production workshop in Tengzhou
Welding, machining and assembly at the Kaiao factory
Kaiao ISO 9001 and CE certificates
Kaiao patent certificates

Request a Quote for the Caisson Rig

Send the deepest pile, the hole diameter, the geological report or soil type, the heaviest load your access road and bridges can take, and your destination port. If a 110 t machine cannot reach the site, say so early, and we will tell you which model still reaches your depth.

Contact Kaiao

Email: [email protected]

Tel: +86 186 6320 9687

Factory: Tengfa Science and Technology Industrial Park, Shannan Road, Tengzhou City, Zaozhuang City, Shandong Province, 277500, China




Need a quote? Chat with us