![]()
Custom Piling Machines, Factory Direct
![]()
Custom Piling Machines, Factory Direct












Excavator piling rig on SANY-, XCMG- or SDLG-based chassis for Φ1200–1600 mm holes to 10–20 m, by Kaiao.
This excavator piling rig is built on a SANY-based, XCMG-based or SDLG-based 60 or 75 excavator chassis and drills Φ1200–1600 mm holes to 10–20 m depth. Torque is 50–90 kN·m and weight is 9.6–13.5 t. Six versions cover the range, including a 20 m telescopic model.
| Specification | SANY 60 Version | XCMG 60 Version | SDLG 75 Version | SANY 75 Version | SANY 75 Telescopic Version | XCMG 75 Version |
|---|---|---|---|---|---|---|
| Model | KA-60 (SANY-based) | KA-60 (XCMG-based) | KA-75 (SDLG-based) | KA-75 (SANY-based) | KA-75 Telescopic (SANY-based, 20 m) | KA-75 (XCMG-based) |
| Base excavator chassis | SANY 60 excavator | XCMG 60 excavator | SDLG 75 excavator | SANY 75 excavator | SANY 75 excavator, telescopic undercarriage | XCMG 75 excavator |
| Hole diameter | Φ1200 mm (47 in) | Φ1200 mm (47 in) | Φ1600 mm (63 in) | Φ1500 mm (59 in) | Φ1500 mm (59 in) | Φ1500 mm (59 in) |
| Drilling depth (rated) | 10–15 m (33–49 ft) | 10–15 m (33–49 ft) | 15 m (49 ft) | 15 m (49 ft) | 20 m (66 ft) | 15 m (49 ft) |
| Torque | 55 kN·m | 50 kN·m | 90 kN·m | 90 kN·m | 70 kN·m | 90 kN·m |
| Engine | Kubota V2607 | Kubota V2607 | Weichai WP3.2G50E436 | Isuzu 4JG3X | Isuzu 4JG3X | Weichai WP3.2 |
| Rated power | 36 kW | 35 kW | 36.8 kW | 55 kW | 55 kW | 36.8 kW |
| Machine weight | 9.6 t (21,200 lb) | 9.8 t (21,600 lb) | 13.5 t (29,800 lb) | 13.5 t (29,800 lb) | 13.5 t (29,800 lb) | 13.5 t (29,800 lb) |
| Transport dimensions | 4100×2025×3350 mm | 4100×1920×3450 mm | 7800×2340×3200 mm | 7800×2220×3200 mm | 7800×2220×3200 mm | 7800×2265×3200 mm |
Brand names (SANY, XCMG, SDLG, Zhanyang) are used only to describe the base excavator and do not imply any affiliation with the brand owners.
| Your pile | Version to check | What decides it |
|---|---|---|
| Φ1200 mm, 10–15 m | 60 chassis, SANY or XCMG | 55 or 50 kN·m, 9.6–9.8 t, the lightest in the range |
| Φ1500 mm, 15 m | 75 chassis, SANY or XCMG | 90 kN·m, 13.5 t |
| Φ1600 mm, 15 m | 75 chassis, SDLG | 90 kN·m, 13.5 t, the widest hole in the range |
| Φ1500 mm, 20 m | SANY 75 telescopic | 70 kN·m, telescopic undercarriage, 13.5 t |
| Wider than Φ1600 mm or deeper than 20 m | Outside this range | See section 04 for the next tier |
The 60 chassis comes from SANY or XCMG, and the 75 chassis from SDLG, SANY or XCMG; the SANY 75 also comes as a 20 m version with a telescopic undercarriage. Choose the brand your service shop already knows, and the same drilling equipment goes onto that carrier. To compare other tiers, browse all rotary drilling rigs.
These six versions are built for small piles on sites where a crawler rig will not fit, or where the buyer already runs excavators. The carrier is the point: local parts and local service matter more than a few kN·m on paper.
Most of these machines end up on housing and rural building piles; our guide to concrete piles for houses explains how that foundation is built.
Every version is a rotary rig built on a production SANY, XCMG or SDLG excavator chassis. The drilling equipment is the same on each, while the engine and outline change with the chassis, so pick the brand your service shop or local dealer already knows.
The 60 chassis versions deliver 55 kN·m (SANY) and 50 kN·m (XCMG). The 75 chassis versions deliver 90 kN·m at 15 m, and the 20 m telescopic version delivers 70 kN·m. Torque turns the drilling bucket through the soil.
The 60 chassis drills Φ1200 mm holes at 10–15 m. The 75 chassis drills Φ1500 mm holes at 15 m, or Φ1600 mm on the SDLG chassis, and the SANY version with a telescopic undercarriage reaches 20 m. All depths are rated values.
The 60 chassis versions weigh 9.6–9.8 t and measure 4100 mm long. The 75 chassis versions weigh 13.5 t and measure 7800 mm long. The compact size makes transport easier than a crawler rig of the same depth.
The 60 chassis runs a Kubota V2607 engine at 35–36 kW. The SANY 75 versions run an Isuzu 4JG3X at 55 kW, and the SDLG and XCMG 75 versions run a Weichai engine at 36.8 kW.
Pick the model by depth: the 60 chassis covers 10–15 m, and the 75 chassis covers 15 m, with a telescopic-undercarriage version for 20 m. The rotary head turns the drilling bucket through the soil, and the full bucket is lifted out and unloaded before the next cycle.
The 60 chassis versions deliver 50–55 kN·m at 9.6–9.8 t. The 75 chassis versions deliver 90 kN·m at 15 m and 70 kN·m on the 20 m telescopic version, each at 13.5 t. Engines follow the chassis: Kubota V2607 at 35–36 kW, Isuzu 4JG3X at 55 kW, Weichai at 36.8 kW.
Check that the excavator chassis stands level before the first cut. A tilted carrier tips the mast off plumb, and the hole drifts further with every meter of depth. For background on drilled shaft practice, see ADSC, the International Association of Foundation Drilling. If you are unsure, send us your drawings.
Transport is easier than with a crawler rig of the same depth. The 60 chassis measures 4100 mm long, 1920–2025 mm wide and 3350–3450 mm high. The 75 chassis measures 7800 mm long, 2220–2340 mm wide and 3200 mm high. Tell us your destination and site access, and we will confirm whether these sizes fit the route.

The drilling equipment is mounted on a production excavator chassis from SANY, XCMG or SDLG, and the brand only tells you where the chassis comes from. The drilling equipment is the same on every version, while the engine and outline change with the chassis.
The 60 chassis versions drill 10–15 m, the 75 chassis versions drill 15 m, and the SANY 75 telescopic version drills 20 m. Depths are rated values and depend on the ground and the drilling tool configuration.
The 60 chassis versions weigh 9.6 t (21,200 lb) on the SANY chassis and 9.8 t (21,600 lb) on the XCMG chassis. Every 75 chassis version weighs 13.5 t (29,800 lb), including the 20 m telescopic version.
Kaiao builds larger excavator-based rotary rigs that drill Φ1800–2500 mm holes to 20–30 m and weigh 19.5–28.5 t. Send us your pile diameter, depth and ground conditions, and we will tell you honestly which machine fits your project.
The 60 chassis versions drill Φ1200 mm holes with 50–55 kN·m. The 75 chassis versions drill Φ1500 mm holes, or Φ1600 mm on the SDLG chassis, with 90 kN·m at 15 m and 70 kN·m on the 20 m telescopic version. All values are rated.
The 60 chassis versions measure 4100 mm long, 1920–2025 mm wide and 3350–3450 mm high. The 75 chassis versions measure 7800 mm long, 2220–2340 mm wide and 3200 mm high. Tell us your destination and we will confirm the size fits your route.
These machines carry a one-year warranty or 2,000 operating hours; the exact terms are confirmed in your order. Kaiao supplies spare parts and after-sales service from its own factory.
Transport height is 3200 mm on the 75 chassis and 3350–3450 mm on the 60 chassis, and that is the machine dimension, not the working height with the mast raised. If your site has an overhead limit, send it with your quote request and we will confirm the working height of the version you need.
Kaiao helps you pick the chassis brand and model by pile diameter, depth and ground. Spare parts and after-sales service come from our own factory in Tengzhou, and the machines carry a one-year or 2,000-hour warranty. Learn more about Kaiao.

Tengzhou Kaiao Construction Machinery Co., Ltd. handles development, production, sales, after-sales service and custom work in its own factory, so your questions stay with one team. If you already own an excavator, we can convert it into piling equipment whatever its brand, age or model, and adjust the setup to your ground conditions. The plant covers 30,000 m², employs more than 70 people, and puts every rig through four checks before shipment.
Our own factory in Tengzhou, Shandong
Development to after-sales in one team
Before every rig ships
Company-level certification, plus several patents


Send the pile diameter and depth, the narrowest entry on site, the chassis brand your service shop already handles, and your destination port. If your piles sit between 15 m and 20 m, say so, because that is exactly where the telescopic version changes the answer.
Email: [email protected]
Tel: +86 186 6320 9687
Factory: Tengfa Science and Technology Industrial Park, Shannan Road, Tengzhou City, Zaozhuang City, Shandong Province, 277500, China
Scan with WeChat. On a phone, save the image and scan it from your album.
Send us your project details and we will reply with a recommendation and a quotation.
Send an Email