Drilling Excavator, 20–30 m Rotary Rig | Tengzhou Kaiao

Drilling excavator: excavator-based rotary rig for Φ1800–2500 mm holes to 20–30 m depth, built by Kaiao.

This drilling excavator is a complete rotary rig built on a 135, 155 or 210 excavator chassis. It drills Φ1800–2500 mm holes to 20–30 m with 125–160 kN·m of torque, and the ten versions weigh 19.5–28.5 t.

Technical Specifications

Model Base excavator chassis Hole diameter / depth Torque Engine / power Machine weight Transport dimensions
KA-135 (20 m, SANY-based) SANY 135 excavator Φ1800 mm (71 in) / 20 m (66 ft) 125 kN·m Isuzu 4JJ1 / 86 kW 19.5 t (43,000 lb) 9300×2490×3300 mm
KA-135 (20 m, XCMG-based) XCMG 135 excavator Φ1800 mm (71 in) / 20 m (66 ft) 125 kN·m Yuchai YCF36115-T480 / 85 kW 22 t (48,500 lb) 9300×2525×3300 mm
KA-135 (25 m, SDLG-based) SDLG 135 excavator Φ1800 mm (71 in) / 25 m (82 ft) 125 kN·m Cummins B3.9CS4115C / 85 kW 21 t (46,300 lb) 9300×2490×3300 mm
KA-135 (25 m, SANY-based) SANY 135 excavator Φ2000 mm (79 in) / 25 m (82 ft) 125 kN·m Isuzu 4JJ1 / 86 kW 23.5 t (51,800 lb) 9300×2490×3300 mm
KA-135 (25 m, XCMG-based) XCMG 135 excavator Φ2000 mm (79 in) / 25 m (82 ft) 125 kN·m Yuchai YCF36115-T480 / 85 kW 23.5 t (51,800 lb) 9300×2525×3300 mm
KA-135 Telescopic (25 m, SANY-based) SANY 135 excavator Φ2000 mm (79 in) / 25 m (82 ft) 125 kN·m Isuzu 4JJ1 / 86 kW 26 t (57,300 lb) 9300×2490×3300 mm; telescopic chassis 2490–3300 mm
KA-135 Telescopic (30 m, SANY-based) SANY 135 excavator Φ1800 mm (71 in) / 30 m (98 ft) 125 kN·m Isuzu 4JJ1 / 86 kW 28.5 t (62,800 lb) 9300×2490×3300 mm; telescopic chassis 2490–3200 mm
KA-155 Excavator-Based (30 m, SANY-based) SANY 155 excavator Φ2000 mm (79 in) / 30 m (98 ft) 135 kN·m Isuzu 4JJ1 / 86 kW 27 t (59,500 lb) 10500×2490×3300 mm
KA-155 Excavator-Based (30 m, XCMG-based) XCMG 155 excavator Φ2000 mm (79 in) / 30 m (98 ft) 135 kN·m Cummins F4.5CS4119 / 89 kW 27 t (59,500 lb) 10500×2590×3300 mm
KA-210E Wheeled (25 m) Zhanyang 210 wheeled excavator Φ2500 mm (98 in) / 25 m (82 ft) 160 kN·m / 20–55 r/min Cummins 260 hp (194 kW) 27.5 t (60,600 lb) 9800×2850×3600 mm

KA-210E Wheeled Version: Additional Specifications

Crowd cylinder force 120 / 110 kN
Crowd cylinder stroke 2600 mm
Main winch 125 kN / 65 m/min
Auxiliary winch 20 kN / 70 m/min
Travel speed 45 km/h
Gradeability 30%
Overall width 2850 mm

Brand names (SANY, XCMG, SDLG, Zhanyang) are used only to describe the base excavator and do not imply any affiliation with the brand owners.

Drilling Excavator: Which Version for Which Pile

Chassis family Hole diameter Depth Torque Weight Engine power
135 chassis, crawler Φ1800–2000 mm 20, 25 or 30 m 125 kN·m 19.5–28.5 t 85–86 kW
155 chassis, crawler Φ2000 mm 30 m 135 kN·m 27 t 86–89 kW
210 chassis, wheeled Φ2500 mm 25 m 160 kN·m 27.5 t Cummins 260 hp
Your pile Version to check
Φ1800 mm, 20 m KA-135, SANY or XCMG chassis
Φ1800 mm, 25 m KA-135, SDLG chassis
Φ2000 mm, 25 m KA-135, SANY or XCMG chassis, or the SANY KA-135 telescopic version
Φ1800 mm, 30 m KA-135 telescopic version, SANY chassis
Φ2000 mm, 30 m KA-155 Excavator-Based, SANY or XCMG chassis
Φ2500 mm, 25 m KA-210E, Zhanyang wheeled chassis

The KA-135 covers the widest range of depths and the lightest versions. The KA-155 Excavator-Based adds torque and a 30 m depth at Φ2000 mm on a 155 chassis. The KA-210E adds the largest hole, Φ2500 mm, and wheeled travel. Choose the chassis brand your service shop knows. To compare other tiers, browse all rotary drilling rigs.

Where This Range Fits, and Where It Does Not

These ten versions sit between the small 60 and 75 chassis rigs and the 40–50 m crawler class. The carrier is bought in, the drilling equipment is ours, and the depth window is 20 to 30 m.

This range fits

  • Piles at Φ1800–2500 mm, between 20 m and 30 m deep.
  • Buyers whose local service network already handles SANY, XCMG, SDLG or Zhanyang excavators.
  • Transport at 19.5–28.5 t and 9.3–10.5 m long, on a standard low-bed trailer.

Step to a different machine when

These rigs work on housing, municipal, rural and power grid piles. Our guide to types of piling sets out how a bored pile differs from a driven one.

Key Features of the Drilling Excavator

Ten Versions, 135 to 210 Chassis

Every version is a complete rotary rig built on a production excavator chassis and sold as a whole machine. It is not an attachment for an excavator you already own. Choose the chassis brand your service shop or local dealer already knows.

125, 135 and 160 kN·m

The KA-135 delivers 125 kN·m on a 135 chassis, the KA-155 Excavator-Based delivers 135 kN·m on a 155 chassis, and the KA-210E delivers 160 kN·m at 20–55 r/min on a 210 wheeled chassis. Torque turns the bucket through the soil.

Φ1800–2500 mm, 20–30 m

The KA-135 drills Φ1800 mm at 20 m, Φ1800–2000 mm at 25 m, and Φ1800 mm at 30 m on its telescopic version. The KA-155 Excavator-Based drills Φ2000 mm at 30 m, and the KA-210E drills Φ2500 mm at 25 m. Depths are rated values.

Crawler or Wheeled, 19.5–28.5 t

The KA-135 and KA-155 Excavator-Based run on crawler tracks; two SANY-based KA-135 versions have a telescopic undercarriage, 2490–3300 mm at 26 t and 2490–3200 mm at 28.5 t. The KA-210E runs on a Zhanyang 210 wheeled chassis at up to 45 km/h and climbs 30% gradients.

Isuzu, Yuchai or Cummins

The KA-135 runs an Isuzu at 86 kW on the SANY chassis, a Yuchai at 85 kW on the XCMG chassis, and a Cummins at 85 kW on the SDLG chassis. The KA-155 Excavator-Based runs an Isuzu at 86 kW or a Cummins at 89 kW. The KA-210E runs a Cummins 260 hp engine.

Excavator Drills: Engine, Telescopic Chassis and Transport Size

Engines follow the chassis. The KA-135 runs an Isuzu at 86 kW on the SANY chassis, a Yuchai at 85 kW on the XCMG chassis, and a Cummins at 85 kW on the SDLG chassis. The KA-155 Excavator-Based runs an Isuzu at 86 kW on the SANY chassis and a Cummins at 89 kW on the XCMG chassis. The KA-210E runs a Cummins 260 hp engine. In every version the rotary head turns the drilling bucket through the soil, and the full bucket is lifted out and unloaded before the next cycle.

The drilling tool on the bar works the same way on every version; the bar itself is covered in our guide to the kelly bar. The pour that follows the hole is a separate stage, covered in our guide to the tremie pipe.

For background on drilled shaft practice, see ADSC, the International Association of Foundation Drilling. If you are unsure, send us your drawings.

Drill Excavator: Weight and Transport Size

Transport sizes run 9300 mm long on the KA-135, 10500 mm on the KA-155 Excavator-Based and 9800 mm on the KA-210E, with widths of 2490–2590 mm on the excavator-based versions and 2850 mm on the wheeled one. Heights are 3300 mm on the crawler versions and 3600 mm on the KA-210E. Tell us your access road and destination, and we will confirm the version fits the route.

  • The KA-135 at 19.5–28.5 t and 9.3 m long is the easiest of the three families to move.
  • The KA-155 Excavator-Based reaches 10.5 m long, so it needs a longer low-bed trailer.
  • The KA-210E travels by road at 45 km/h, so it can move between sites under its own power.
Kaiao rotary drilling rigs loaded for shipment to customers
Kaiao rotary drilling rig shipments to domestic and overseas customers

Frequently Asked Questions

Is this a drilling attachment for my own excavator?

No. This is a complete rotary rig built on a production SANY, XCMG, SDLG or Zhanyang excavator chassis and sold as a whole machine. The brand only tells you where the chassis comes from. Tell us your pile diameter, depth and ground, and we will tell you honestly which version fits.

How deep can this drilling excavator drill?

Depending on the version, it drills to a rated depth of 20 m, 25 m or 30 m. The KA-135 covers 20, 25 and 30 m, the KA-155 Excavator-Based drills 30 m, and the KA-210E drills 25 m. Depths depend on the ground and the drilling tool configuration.

What is the difference between the KA-135 and the KA-155 Excavator-Based?

The KA-135 is built on a 135 excavator and delivers 125 kN·m, while the KA-155 Excavator-Based is built on a 155 excavator and delivers 135 kN·m with a 30 m depth at Φ2000 mm. The KA-155 Excavator-Based weighs 27 t, and the KA-135 weighs 19.5–28.5 t depending on version.

Is the KA-155 Excavator-Based the same as your KA-155 crawler rig?

No. Our foundation drill rig KA-155 is a separate 42–50 t machine with its own chassis, while the KA-155 Excavator-Based is a 27 t rig built on a SANY or XCMG 155 excavator. Name the version when you request a quote so we quote the right machine.

What is the largest hole diameter and torque?

The KA-210E drills the largest holes, Φ2500 mm (98 in), with 160 kN·m at 20–55 r/min. The KA-155 Excavator-Based drills Φ2000 mm with 135 kN·m, and the KA-135 drills Φ1800–2000 mm with 125 kN·m. All values are rated.

What are the weight and chassis width of each version?

Weights run from 19.5 t (SANY KA-135, 20 m) to 28.5 t (SANY KA-135 telescopic, 30 m), with the KA-155 Excavator-Based at 27 t and the KA-210E at 27.5 t. Transport widths are 2490–2590 mm on the excavator-based versions and 2850 mm on the KA-210E. The telescopic versions extend to 3300 mm and 3200 mm.

What warranty covers these machines?

These machines carry a one-year warranty or 2,000 operating hours; the exact terms are confirmed in your order. Kaiao supplies spare parts and after-sales service from its own factory.

What overhead clearance do these machines need?

Transport height is 3300 mm on the crawler versions and 3600 mm on the KA-210E, and that is the machine dimension, not the working height with the mast raised. If your site has an overhead limit, send it with your quote request and we will confirm the working height of the version you need.

Related Applications

  • Housing project foundations
  • Municipal construction piles
  • Rural building foundations
  • Power grid upgrade foundations

Browse every Kaiao rotary drilling rig, from excavator-based rigs to deep foundation rigs, in the Products center.

Technical Support

Kaiao helps you pick the chassis brand and version by pile diameter, depth and ground. Spare parts and after-sales service come from our own factory in Tengzhou, and the machines carry a one-year or 2,000-hour warranty. Learn more about Kaiao.

Overseas customers visiting the Kaiao factory in Tengzhou
Group photos of overseas customers at the Kaiao factory

Factory and Custom Work

Tengzhou Kaiao Construction Machinery Co., Ltd. handles development, production, sales, after-sales service and custom work in its own factory, so your questions stay with one team. The plant covers 30,000 m², employs more than 70 people, and puts every rig through four checks before shipment.

30,000 m² Plant

Our own factory in Tengzhou, Shandong

70+ Employees

Development to after-sales in one team

4 Checks

Before every rig ships

ISO 9001 and CE

Company-level certification, plus several patents

Kaiao factory overview and production workshop in Tengzhou
Welding, machining and assembly at the Kaiao factory
Kaiao ISO 9001 and CE certificates
Kaiao patent certificates

Request a Quote for the Drill Excavator

Send the pile diameter and depth, the ground or geological report, the site access, and the chassis brand your service shop already knows. If your piles land exactly on 25 m or 30 m, tell us which side, because that is where the 135 and the 155 chassis split.

Contact Kaiao

Email: [email protected]

Tel: +86 186 6320 9687

Factory: Tengfa Science and Technology Industrial Park, Shannan Road, Tengzhou City, Zaozhuang City, Shandong Province, 277500, China




Need a quote? Chat with us