Best-Selling Products

CFA Piling Rig

CFA Piling Rig That Also Does Rotary Drilling

This CFA piling rig comes in two models, KA-155CFA and KA-285CFA. Drill CFA piles at Φ600–800 mm to 20–30 m, or switch the tooling and drill rotary piles at Φ1500–2200 mm to 40–60 m. Same crawler, same operator, same mobilisation.

  • Two methods on one chassis: CFA and kelly bar rotary
  • Φ600–800 mm CFA piles, no spoil to cart away
  • Built to order in our own factory in Tengzhou

What Makes This Machine Different

Two methods, one chassis

CFA piles and rotary piles are normally two machines. Here they share one crawler, one mast and one power pack — you change the tooling, not the machine.

Factory CFA circuit, not a conversion

The concrete circuit is plumbed at the factory, so the pumping line, swivel and controls are part of the build, not added after delivery.

No spoil on CFA work

In CFA mode the auger displaces soil instead of lifting it out. No muck to cart away and no slurry pond, which is what makes city sites workable.

One machine instead of two

No second purchase, no second low-bed, no second operator. The same rig takes CFA piles in soft ground and rotary piles in cobble or weathered rock.

CFA Piling Rig: Technical Specifications

Both versions of this CFA piling rig are built on the same crawler chassis, so the difference between them is torque, depth and tooling, not layout.

SpecificationKA-155CFAKA-285CFA
Rotary mode: max. torque155 kN·m285 kN·m
Rotary mode: speed7–33 r/min6–28 r/min
Rotary mode: max. diameterΦ1500 mmΦ2200 mm
Rotary mode: max. depth40 m60 m
CFA mode: max. pile diameterΦ600 mmΦ800 mm
CFA mode: max. pile depth20 m30 m
Crowd force, push / pull155 / 160 kN265 / 235 kN
Crowd stroke3500 mm5500 mm
Main winch, force / line speed180 kN / 60 m/min320 kN / 50 m/min
Auxiliary winch, force / line speed50 kN / 65 m/min60 kN / 60 m/min
Mast rake, side / forward / back±5° / 5° / 15°±4° / 5° / 15°
Travel speed3 km/h2 km/h
Gradeability35%35%
Track outer width3200–4400 mm3500–4600 mm
EngineCummins 260 hp (194 kW)Cummins 400 hp (294 kW)
Hydraulic system pressure35 MPa35 MPa
Concrete pumpSupplied with the machine, matched to pile diameter and pumping distance
CertificationMachine CE certified; ISO 9001 at company level
Operating weight (CFA configuration)52 t85 t
Working dimensions (L×W×H)7600×4400×18500 mm10500×4600×23600 mm
Transport dimensions (L×W×H)13000×3200×3500 mm17200×3500×3600 mm

Figures above are for the standard configuration. Pile diameter, pile depth, mast height, low-clearance version, engine emission standard, kelly bar sections and pump size are built to order, and the figures change with the configuration.

How Continuous Flight Auger Piles Are Built

Continuous flight auger piles, also called auger cast piles in the US, are built in one pass. In this mode the auger is the drill and the concrete pipe at the same time, so there is no casing and no separate pour.

  1. Auger to depth. The hollow auger drills to the design depth. Soil is pushed into the bore wall instead of being lifted out, so there is no spoil to handle.
  2. Pump and withdraw. Concrete is pumped down the centre of the auger while the auger is drawn up at a controlled rate, so the concrete fills the hole from the bottom.
  3. Pile is formed. The column stays full as the auger leaves. The pile is continuous and dense, with no joint and no water pocket.
  4. Cage goes in. The reinforcement cage is inserted while the concrete is still workable, by vibrator or under its own weight, depending on the cage length.

For background on auger cast piles and drilled foundations, see ADSC, the International Association of Foundation Drilling. The rotary side of this machine follows the same bar practice covered in our guide to the kelly bar.

Rotary or CFA: Which Mode for Which Job

 Rotary modeCFA mode
Pile size(Max)Φ2200 mm, 60 mΦ800 mm, 30 m
GroundCobble, weathered rock, hard layersClay, silt, sand, fill, soft ground
Soil removalBucket lifts soil outSoil displaced, no spoil
ConcretePoured later, through a tremiePumped through the auger, one pass
Site conditionNeeds muck-away and usually slurryClean site, no slurry pond
SpeedSlower, two stagesFast, drill and pour together

If the piles are large or the ground is hard, rotary mode does the work. If the piles are smaller and the site has to stay clean, CFA mode is the faster route.

Which Machine Do You Actually Need?

This machine earns its price when you need both pile types. If you only need one method, a single-purpose rig is lighter, simpler and cheaper. The table says where to go instead.

Your workMachineWhy
CFA piles and rotary piles on the same siteThis page: KA-155CFA / KA-285CFAOne chassis, two methods, one mobilisation
Rotary only, Φ1800 mm, 40–50 mFoundation drill rigLighter machine, 42–50 t, no CFA circuit to carry
Rotary only, Φ1800 mm, 15–35 mKelly bar drill rigCompact crawler from 23 t, easier on tight sites
Deeper than 60 m or wider than Φ2200 mmCaisson drill rig57–105 m, Φ2000–2700 mm
Solar ground screws, no concrete at allGround screw machineScrews the pile in, no pump and no curing

Not sure which pile type your ground needs? Our guide to types of piling sets out the difference between bored, driven and screw piles.

Built to Your Site, Not to a Catalogue

What can be changedWhat it affects
Pile diameter and depthCFA and rotary limits
Mast height, low-clearance versionWorking height, transport height
Engine emission standardPower rating, fuel system (China III / IV, Euro V)
Concrete pump sizePumping rate and distance
Kelly bar sections, friction or interlockingRotary depth
Extra attachmentsHelical anchors, mixing tools

Tell us the pile size, the ground and the site limits, and we build the configuration around them. That is the difference between a catalogue machine and a machine that fits.

Where These Two Models Work

  • Building foundation piles, including city sites that cannot take muck-away or slurry.
  • Municipal road and bridge pile caps.
  • Solar farm foundations, where CFA piles and helical anchors come off the same machine.
  • Slope support and foundation reinforcement on renovation projects.
  • Farmland water conservancy and small bridge foundations.

Frequently Asked Questions

What is this CFA piling rig, and how does it make a pile?

It is a crawler rig that carries two tooling sets. In CFA mode a hollow auger drills to depth, then concrete is pumped down the centre of the auger as it is withdrawn, so the pile is built in one pass without casing or slurry. In rotary mode the same mast takes a kelly bar and a drilling bucket for larger piles.

Can one machine really do both rotary and CFA?

Yes, with a tooling change. The same crawler and mast carry either a kelly bar with a drilling bucket for rotary mode, or a hollow auger with the concrete circuit for CFA mode. The CFA circuit is plumbed at the factory, not added afterwards.

What sizes can it install in each mode?

KA-155CFA reaches Φ600 mm CFA piles to 20 m, or Φ1500 mm rotary piles to 40 m. KA-285CFA reaches Φ800 mm CFA piles to 30 m, or Φ2200 mm rotary piles to 60 m. Depth also depends on the kelly bar sections and the ground.

Is the concrete pump included?

Yes. The pump is supplied with the machine and matched to the pile diameter and the pumping distance, so the rig arrives able to pour.

How is this different from buying a rotary rig and a CFA rig separately?

One purchase instead of two, one low-bed instead of two, and one operator instead of two. On a site that needs both pile types, the rig changes mode instead of waiting for a second machine to mobilise.

Is it CE certified and available for export?

Yes. The machine is CE certified, and Kaiao holds ISO 9001 at company level. We handle export documents and can arrange inspection at the factory before shipment.

Built in Tengzhou, Shipped Worldwide

Tengzhou Kaiao Construction Machinery Co., Ltd. started in 2004 and has spent more than twenty years building piling equipment. Development, production, sales, after-sales service and custom work all happen in our own factory, so your questions stay with one team instead of being passed between companies.

Kaiao factory and workshop overview in Tengzhou, Shandong Kaiao workshop welding, machining and assembly areas
  • Started in 2004, more than twenty years building piling equipment
  • More than 1,000 units a year for five years in a row
  • ISO 9001 and CE certification, plus patents on wireless remote control and automatic drilling
  • Machines working in China and in many other countries
Kaiao ISO 9001 and CE certificates Kaiao patent certificates

Customers from different countries come to the factory to see the machines running before they order, and to go through the drawings with our engineers. If you plan a visit, tell us the dates and the models you want to see.

Overseas customers visiting the Kaiao factory in Tengzhou Group photos of overseas customers at the Kaiao factory

Each rig is tested before it leaves, then loaded for the road or the container. We arrange the shipping documents and stay with the order until the machine is on site.

Kaiao piling rigs loaded for shipment to customers Kaiao machines shipped to customers in China and overseas

Send the Pile Size and the Ground

Tell us the pile diameter, the depth, the ground type and the site limits. We will tell you honestly whether this CFA piling rig is the right one, or whether a single-method machine does the job for less.

Contact Kaiao

Email: [email protected]

Tel: +86 186 6320 9687

Factory: Tengfa Science and Technology Industrial Park, Shannan Road, Tengzhou City, Zaozhuang City, Shandong Province, 277500, China

Need a quote? Chat with us