Truck Mounted Drill Rig, 360° and 180° Models, 20–30 m Depth

Truck mounted drill rig in 360° and 180° models for holes up to 2000 mm and 20–30 m depth, by Kaiao.

This truck mounted drill rig is a rotary rig on a wheeled chassis, in 360° and 180° slewing versions, drilling Φ400–2000 mm holes to 20–30 m depth. The three models weigh 10–11 t, deliver 55–60 kN·m of torque and run a Weichai 6105 engine.

Technical Specifications

Specification 30 m 360° Model 25 m 360° Model 20 m 180° Model
Model WD-30 (360°) WD-360 (360°, 25 m) WD180-20 (180°, square kelly bar)
Chassis Wheeled Wheeled, self-propelled Wheeled
Slewing 360° 360° 180°
Kelly bar On request On request Square
Hole diameter Φ400–2000 mm (16–79 in) Φ400–1800 mm (16–71 in) Φ400–2000 mm (16–79 in)
Drilling depth (rated) 30 m (98 ft) 25 m (82 ft) 20 m (66 ft)
Torque / rotary speed 60 kN·m / 24–40 r/min 55 kN·m / 24–45 r/min 55 kN·m / 24–45 r/min
Crowd system Cylinder Cylinder Cylinder
Engine Weichai 6105 Weichai 6105 Weichai 6105
Rated power 103 kW on request 103 kW
Machine weight 10 t (22,000 lb) 11 t (24,300 lb) 10.5 t (23,100 lb)
Transport dimensions 10×2.35×3.25 m 9.5×2.3×3.2 m 9.5×2.3×3.2 m
Hydraulic system pressure (all models) 16 MPa

The brand name Weichai is used only to describe the engine and does not imply any affiliation with the brand owner.

Truck Mounted Drill Rig: Which Model for Which Hole

Your job Model to check What decides it
Holes to 30 m at Φ2000 mm, one setup per position WD-30 60 kN·m, 10 t, 360° slewing
Holes to 25 m, hole layout spread wide WD-360 55 kN·m, 11 t, 360° slewing and self-propelled
Holes to 20 m, square kelly bar, straight line or small arc WD180-20 55 kN·m, 10.5 t, 180° slewing

The WD-30 drills deepest, at 30 m with 60 kN·m. The WD-360 gives 360° slewing at 25 m with holes up to Φ1800 mm. The WD180-20 gives 180° slewing and a square kelly bar at 20 m with holes up to Φ2000 mm. All three run on a wheeled chassis with a cylinder crowd system and a 16 MPa hydraulic system. To compare other tiers, browse all rotary drilling rigs.

Where These Machines Fit, and Where They Do Not

A wheeled chassis buys road speed and quick repositioning, and pays for it in weight and torque. These three models sit where a truck can reach the hole and the pile stays under 30 m.

These machines fit

  • Holes at Φ400–2000 mm, between 20 m and 30 m deep.
  • Sites where one setup should cover several hole positions: the WD-30 and WD-360 slew 360°.
  • Water well drilling: all three models can drill water wells as well as foundation piles.

Step to a different machine when

These piles are cast-in-place, and our guide to types of piling explains how that differs from a driven pile.

Key Features of the Truck Mounted Drill Rig

360° or 180°, One Setup

The WD-30 and WD-360 slew 360°, and the WD180-20 slews 180°. A wider slewing range lets one setup reach more hole positions, which is why Kaiao offers both. Pick the range that matches your hole layout.

55–60 kN·m at 24–45 r/min

The WD-30 delivers 60 kN·m at 24–40 r/min, and the WD-360 and WD180-20 deliver 55 kN·m at 24–45 r/min. Torque turns the drilling bucket through the soil, and a cylinder crowd system presses it down.

Φ400–2000 mm, 20–30 m

The WD-30 drills Φ400–2000 mm holes to 30 m, the WD-360 drills Φ400–1800 mm to 25 m, and the WD180-20 drills Φ400–2000 mm to 20 m. All depths are rated values.

10–11 t on Wheels, 9.5–10 m Long

All three models run on a wheeled chassis and weigh 10–11 t. The WD-360 is self-propelled on its wheels. Transport lengths of 9.5–10 m keep the rig compact enough to move between sites.

Weichai 6105, 103 kW

All three models use a Weichai 6105 engine, rated 103 kW on the WD-30 and WD180-20. The hydraulic system runs at 16 MPa, so one power package feeds the rotary head and the crowd cylinder.

Drill Rig Truck: Hole Diameter, Depth and Torque

Pick by hole diameter and depth first: 20 m, 25 m or 30 m. The rotary head turns the drilling bucket while the cylinder crowd system presses it into the ground, and the full bucket is lifted out and unloaded before the next cycle. The WD-30 and WD180-20 drill up to Φ2000 mm, and the WD-360 drills up to Φ1800 mm. In general, 55–60 kN·m of torque suits the small and medium pile diameters of this class.

Chock the wheels and level the chassis before the first rotation. A wheeled machine that shifts on soft ground pulls the mast off plumb, and the hole drifts off vertical.

For background on drilled shaft practice, see ADSC, the International Association of Foundation Drilling. If you are unsure, send us your drawings.

Truck Mounted Drilling Rig: Weight and Transport Size

Plan transport before you commit. The WD-30 measures 10×2.35×3.25 m at 10 t, the WD-360 measures 9.5×2.3×3.2 m at 11 t, and the WD180-20 measures 9.5×2.3×3.2 m at 10.5 t. Kaiao builds all three in its own factory, so tell us your pile diameter, depth, ground and destination, and we will tell you honestly which one fits.

  • All three travel on a standard flatbed or under their own power on a road.
  • Heights of 3.2–3.25 m, so check the lowest bridge or overhead line on the route.
  • Weights of 10–11 t let one low-bed trailer carry the machine without a heavy-haul permit in most markets.
Kaiao rotary drilling rigs loaded for shipment to customers
Kaiao rotary drilling rig shipments to domestic and overseas customers

Frequently Asked Questions

What is the difference between the 360° and the 180° model?

The WD-30 and WD-360 slew 360°, while the WD180-20 slews 180° and uses a square kelly bar. A wider slewing range lets one setup reach more hole positions. Tell us your hole layout and we will tell you honestly which range fits.

How deep can this truck mounted drill rig drill?

The WD180-20 drills to a rated depth of 20 m, the WD-360 to 25 m, and the WD-30 to 30 m. Depths depend on the ground and the kelly bar configuration. Send us your pile depth and ground conditions, and we will confirm the model.

What hole diameter can I drill?

The WD-30 and WD180-20 drill holes up to Φ2000 mm (79 in) in diameter, and the WD-360 drills up to Φ1800 mm (71 in). All three start at Φ400 mm (16 in). Choose by pile diameter first, then by depth.

Which engine is fitted?

All three models use a Weichai 6105 engine. The WD-30 and WD180-20 are rated at 103 kW. The WD-360 rating is confirmed on request, so ask when you request your quote.

What torque do these models deliver?

The WD-30 delivers 60 kN·m at 24–40 r/min, and the WD-360 and WD180-20 deliver 55 kN·m at 24–45 r/min. All values are rated rotary head torque, and a cylinder crowd system presses the bucket into the ground.

What are the weight and transport size of each model?

The WD-30 weighs 10 t (22,000 lb) and measures 10×2.35×3.25 m. The WD-360 weighs 11 t (24,300 lb) and the WD180-20 weighs 10.5 t (23,100 lb), and both measure 9.5×2.3×3.2 m. Transport height is not working height, so send us your overhead limit and destination.

Can these rigs drill water wells?

All three models can drill water wells as well as foundation piles. Tell us the well diameter, depth and ground conditions, and we will tell you honestly which model fits your project.

What warranty covers these machines?

These machines carry a one-year warranty or 2,000 operating hours; the exact terms are confirmed in your order. Kaiao supplies spare parts and after-sales service from its own factory.

Related Applications

  • Housing project foundations
  • Municipal construction piles
  • Rural building foundations
  • Water well drilling

Most of these machines end up on residential work; our guide to concrete piles for houses explains how that foundation is built, and the Products center lists the rest of the range.

Technical Support

Kaiao helps you pick a model by hole diameter, depth and slewing range. Spare parts and after-sales service come from our own factory in Tengzhou, and the machines carry a one-year or 2,000-hour warranty. Learn more about Kaiao.

Overseas customers visiting the Kaiao factory in Tengzhou
Group photos of overseas customers at the Kaiao factory

Factory and Custom Work

Tengzhou Kaiao Construction Machinery Co., Ltd. handles development, production, sales, after-sales service and custom work in its own factory, so your questions stay with one team. The plant covers 30,000 m², employs more than 70 people, and puts every rig through four checks before shipment.

30,000 m² Plant

Our own factory in Tengzhou, Shandong

70+ Employees

Development to after-sales in one team

4 Checks

Before every rig ships

ISO 9001 and CE

Company-level certification, plus several patents

Kaiao factory overview and production workshop in Tengzhou
Welding, machining and assembly at the Kaiao factory
Kaiao ISO 9001 and CE certificates
Kaiao patent certificates

Request a Quote for the Drill Rig Truck

Send the hole diameter and depth, a rough plan of the hole layout, the ground or soil report, and your destination port. If one setup has to cover many positions, say how far apart they are, because slewing range decides more on this page than torque does.

Contact Kaiao

Email: [email protected]

Tel: +86 186 6320 9687

Factory: Tengfa Science and Technology Industrial Park, Shannan Road, Tengzhou City, Zaozhuang City, Shandong Province, 277500, China




Need a quote? Chat with us